Applications
Debris collector for hole sawing applications where dust, chips and other cutting debris need to be contained. The flexible collector seals against the work surface and collects debris directly during cutting. Particularly useful for installation and service work indoors where reduced clean-up and protection of the surrounding area are important.
Features & functions
- Collects dust, chips and cutting debris directly during hole sawing
- Flexible construction follows the hole saw during cutting
- Rim seals against the work surface to help contain debris
- Reduces the need for masking and clean-up after cutting
- Helps keep dust and debris away from the drill motor and airways
- Can be pulled back for improved visibility when positioning the hole saw
- Compatible with several Starrett hole saw ranges
- Suitable for hole saws up to 121 mm
Technical data
- Brand: Starrett
- Supplier product code: DB2
- Supplier item number: AY2835
- Type: Dust and debris collector
- Max. hole saw diameter: 121 mm (4 3/4")
- Compatible hole saw ranges: Fast Cut, Deep Cut, TCT Multi Purpose, Carbide Tipped and Diamond
- Number of parts: 1
Installation
Pass the arbor shank through the opening in the bottom of the debris collector and fit the arbor into the drill as normal. Make sure the debris collector can move freely before starting work.
Position the pilot drill on the centre mark and press the rim of the collector against the work surface. As the hole is cut, the collector flexes and captures dust, chips and other debris inside.
Important information
- Suitable for hole saws up to 121 mm.
- Always make sure the debris collector can move freely around the arbor before use.